Installation Procedure
WARNING: This page is about a different car, the 2015 Chevrolet Trax and 2015 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.
- Install the battery negative cable (1) to the battery.
- Fasten the battery negative cable nut (2) and tighten the nut to 4.5 N.m (40 lb in).
- Insert the ignition key and turn the ignition to the ON position.
- Program all of the customer's radio station presets and set the radio clock to the current time.
CAUTION:
Refer to Fastener Caution .