Removal Procedure
WARNING: This page is about a different car, the 2015 Chevrolet Trax and 2015 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.
- Release the park brake.
- Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
- Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation .
- Remove the brake drum bolt (1).
- Remove the brake drum (1).
- If reinstalling the brake drum, use the CH-41013 rotor resurfacing kit to clean the wheel hub flange mating surface of the brake drum of any corrosion.
WARNING:
Refer to Brake Dust Warning .