LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2015 >> Cruze LT, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 46 (Wheel Drive Shafts) >> Specifications >> Fastener Specifications

Fastener Specifications

WARNING: This page is about a different car, the 2015 Chevrolet Trax and 2015 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.
Application Specification
Metric English
Front Wheel Drive Intermediate Shaft Bolts 58 N.m 43 lb ft
Front Wheel Drive Intermediate Shaft Flange Bolts 22 N.m 16 lb ft
Front Wheel Drive Shaft Nut (1)
  • First Pass
50 N.m 37 lb ft
  • Final Pass
plus 60 degrees
Rear Wheel Drive Shaft Nut (1)
  • First Pass
50 N. 37 lb ft
  • Final Pass
plus 60 degrees
Rear Wheel Drive Shaft Bolts 58 N.m 43 lb ft
Note: 1 indicates a torque to yield fastener. DO NOT reuse. Replace with NEW only.