Circuit/System Verification
WARNING: This page is about a different car, the 2015 Chevrolet Trax and 2015 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition ON
- Verify the instrument cluster indicators listed below turn On and Off when commanding the All Indicators On and Off with a scan tool.
- Stability control off indicator
- Traction control off indicator
- Traction/stability control indicator
- If any indicator does not turn On and Off
Replace the P16 Instrument Cluster.
- If all indicators turns On and Off
- Verify the scan tool Electronic Brake Control Module Traction Control Switch parameter changes between Active and Inactive while pressing and releasing the traction control switch.
- If the parameter does not change
Refer to Circuit/System Testing.
- If the parameter changes
- If the parameter does not change
- All OK.