LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2015 >> Cruze LT, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 41 (Antilock Brake System) >> Diagnostic Information and Procedures >> DTC B2745: Traction Control Switch (With C60/C41) >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2015 Chevrolet Trax and 2015 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition ON.
  2. Verify the instrument cluster Traction Control indicator turns On and Off when commanding the instrument cluster All Indicators On and Off with a scan tool.
    • If the indicator does not turn On and Off 

      Replace the P16 Instrument Cluster.

    • If the indicator turns On and Off 
  3. Verify the scan tool Traction Control Switch parameter changes between Active and Inactive while pressing and releasing the traction control switch.
    • If the parameter does not change 

      Refer to Circuit/System Testing.

    • If the parameter changes 
  4. All OK.
scientia non olet · About LEMON Manuals