LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2015 >> Cruze LT, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 40 (Hydraulic Brake System) >> Repair Instructions >> Power Brake Booster Pump Bracket Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2015 Chevrolet Trax and 2015 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the power brake booster pump assembly. Refer to Power Brake Booster Pump Replacement .
  2. Fig 1: Power Brake Booster Pump
    GM2772218Courtesy of GENERAL MOTORS COMPANY
  3. Disconnect the power brake booster pump vent hose (1).
  4. Release the power brake booster pump electrical harness and retainer from the power brake booster pump bracket.
  5. Fig 2: Power Brake Booster Pump Nuts
    GM2772219Courtesy of GENERAL MOTORS COMPANY
  6. Remove the power brake booster pump nuts (1).
  7. Fig 3: Power Brake Booster Pump Bolts
    GM2772221Courtesy of GENERAL MOTORS COMPANY
  8. Remove the power brake booster pump bolts (1).
  9. Remove the power brake booster pump bracket.