LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2015 >> Cruze LT, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 40 (Hydraulic Brake System) >> Repair Instructions >> Brake, Accelerator, and Clutch Pedal Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2015 Chevrolet Trax and 2015 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the battery tray. Refer to Battery Tray Replacement .
    2. Fig 1: Power Vacuum Brake Booster Bolts
    GM2539299Courtesy of GENERAL MOTORS COMPANY
  2. Remove the power vacuum brake booster bolts (1).
    3. Fig 2: Brake Pedal Assembly Upper Nuts
    GM2539300Courtesy of GENERAL MOTORS COMPANY
  3. Remove the brake pedal assembly upper nuts (1)
    4. Fig 3: Brake Pedal Assembly Lower Nuts
    GM2539301Courtesy of GENERAL MOTORS COMPANY
  4. Remove the brake pedal assembly lower nuts (1)
  5. Remove the steering column. Refer to Steering Column Replacement (Mexico, N40)Steering Column Replacement (Canada, NJ1)Steering Column Replacement (United States, NJ1) .
    6. Fig 4: Brake Pedal Release Bracket Bolt
    GM2772439Courtesy of GENERAL MOTORS COMPANY
  6. Remove the brake pedal release bracket bolt (1).
    7. Fig 5: Brake Pedal Release Bracket And Bolts
    GM2772441Courtesy of GENERAL MOTORS COMPANY
  7. Remove the brake pedal release bracket bolts (1).
    8. Fig 6: Brake Pedal Release Bracket
    GM2772527Courtesy of GENERAL MOTORS COMPANY
  8. Remove the brake pedal release bracket (1).
  9. Remove the brake pedal position sensor. Refer to Brake Pedal Position Sensor Replacement .
  10. Remove the accelerator pedal position sensor. Refer to Accelerator Pedal Position Sensor Replacement .
  11. Position aside any wiring harnesses attached to the brake pedal assembly bracket, as necessary.
    12. Fig 7: Upper Brake Pedal Assembly Bolts
    GM2772542Courtesy of GENERAL MOTORS COMPANY
  12. Remove the 2 upper brake pedal assembly bolts (1).
    13. Fig 8: Brake Pedal AssemblyAnd Dash Panel
    GM2844872Courtesy of GENERAL MOTORS COMPANY
  13. Pull the brake pedal assembly away from the dash panel.
  14. From behind the brake pedal assembly, remove the brake pedal assembly bracket nut (1).
    15. Fig 9: Brake Pedal Assembly
    GM2844873Courtesy of GENERAL MOTORS COMPANY
  15. Remove the brake pedal assembly bracket (1).
  16. Remove the brake pedal assembly from the vehicle.
  17. Remove any necessary components from the brake pedal assembly.
scientia non olet · About LEMON Manuals