Circuit/System Verification
WARNING: This page is about a different car, the 2015 Chevrolet Trax and 2015 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition ON.
- Verify the scan tool parameters listed below change when pressing and pulling the driver window control switch on the driver window master control:
- Driver Window Main Control Down Switch - Inactive and Active
- Driver Window Main Control Up Switch - Inactive and Active
- Driver Window Main Control Express Switch - Inactive and Active
- If any parameter does not change
Refer to Circuit/System Testing
- If all the parameters change
- All OK.