Installation Procedure
WARNING: This page is about a different car, the 2015 Chevrolet Trax and 2015 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.
- Lower the vehicle.
- Remove the fluid fill cap (1).
- Fill the transmission to the proper level with the correct fluid. Refer to Transmission Fluid Level and Condition Check , and Adhesives, Fluids, Lubricants, and Sealers .
- Install the front compartment front center insulator, if equipped. Refer to Front Compartment Front Center Insulator Replacement .
- Install the fluid fill cap (1).