Circuit/System Verification
WARNING: This page is about a different car, the 2015 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition ON
- Verify the scan tool engine control module A/C High Side Pressure Sensor parameter is between 6.8 kPa (1 psi) and 2950 kPa (428 psi).
- If not between 6.8 kPa (1 psi) and 2950 kPa (428 psi)
Refer to Circuit/System Testing
- If between 6.8 kPa (1 psi) and 2950 kPa (428 psi)
- If not between 6.8 kPa (1 psi) and 2950 kPa (428 psi)
- All OK