Instrument Cluster Replacement (Trax)

WARNING: This page is about a different car, the 2015 Chevrolet Trax and 2015 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Instrument Cluster (Trax)

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Remove the instrument panel instrument cluster hood. Refer to Instrument Panel Instrument Cluster Hood Replacement (Trax) . Remove the steering column upper cover. Refer to Steering Column Upper Trim Cover Replacement (Trax) .
1	Instrument Cluster Fasteners (Qty: 4) CAUTION: Refer to Fastener Caution . Tighten 2.5 N.m (22 lb in)
2	Instrument Cluster Procedure Disconnect the electrical connector. Refer to Control Module References for programming and set up information.

Callout

Component Name

Preliminary Procedures

Remove the instrument panel instrument cluster hood. Refer to Instrument Panel Instrument Cluster Hood Replacement (Trax) .
Remove the steering column upper cover. Refer to Steering Column Upper Trim Cover Replacement (Trax) .

Instrument Cluster Fasteners (Qty: 4)

CAUTION:

Refer to Fastener Caution .

Tighten
2.5 N.m (22 lb in)

Instrument Cluster

Procedure

Disconnect the electrical connector.
Refer to Control Module References for programming and set up information.