LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2015 >> Cruze LT, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 24 (Instrument Panel System Displays And Gauges) >> Diagnostic Information and Procedures >> Driver Information Center Display Malfunction >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2015 Chevrolet Trax and 2015 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition ON.
  2. Verify no DTC is set.
    • If no DTCs are set 
  3. Verify all indicators except the engine malfunction indicator illuminate and turn off as commanded when performing the All Indicators test with the scan tool.
    • If any indicators do not illuminate and turn off as commanded 

      Replace the P16 Instrument Cluster.

    • If all indicators respond properly 
  4. Verify all segments illuminate when performing the Driver Information Center Segments test with the scan tool.
    • If any segments do not illuminate 

      Replace the P16 Instrument Cluster.

    • If all segments illuminate properly 
  5. All OK.
scientia non olet · About LEMON Manuals