Circuit/System Verification
WARNING: This page is about a different car, the 2015 Chevrolet Trax and 2015 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition ON.
- Verify the scan tool Fuel Remaining in Tank parameter is between 5-95% and varies with fuel level.
- If not between 5-95% or does not vary with fuel level
Refer to Circuit/System Testing.
- If between 5-95% and varies with fuel level
- If not between 5-95% or does not vary with fuel level
- Verify that all fuel level gauge segments illuminate when performing the scan tool Driver Information Center Segments control function.
- If any fuel level gauge segments do not illuminate
Replace the P16 Instrument Cluster.
- If all fuel level gauge segments illuminate
- If any fuel level gauge segments do not illuminate
- All OK.