Driver Information Center (DIC) Description and Operation (base Instrument Cluster): Notes
WARNING: This page is about a different car, the 2015 Chevrolet Trax and 2015 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.
In the lower middle of the instrument cluster, an additional display is installed. Its task is to give additional information, such as an odometer, trip odometer, oil life percentage, or error codes/warning messages. Refer to Indicator/Warning Message Description and Operation .
The driver information center is controlled by the stem switch on the face of the Instrument Cluster. The DIC display changes between odometer, trip odometer, oil life percentage, and Unit modes when the odometer trip reset stem on the instrument cluster is pressed. The trip odometer, oil life percentage, and Unit values are reset when the odometer trip reset stem on the instrument cluster is pressed and held.