Circuit/System Verification
WARNING: This page is about a different car, the 2015 Chevrolet Trax and 2015 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition ON.
- Connect an AC powered device to the X81 Accessory Power Receptacle - 110V AC.
- Verify the T6 Power Inverter Module is turned ON and the device works as expected.
- If the device is not powered
Refer to Circuit/System Testing.
- If the device is powered
- If the device is not powered
- All OK.