LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2015 >> Cruze LT, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 18 (Wiring Systems And Power Management - Diagnostic Information And Procedures) >> Diagnostic Information and Procedures >> Testing for Short to Ground >> With a Test Lamp

With a Test Lamp

WARNING: This page is about a different car, the 2015 Chevrolet Trax and 2015 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the power feed (i.e. fuse, control module) from the suspect circuit.
  2. Disconnect the load.
  3. Connect one lead of the test lamp to battery positive voltage.
  4. Connect the other lead of the test lamp to one end of the circuit to be tested.
  5. If the test lamp illuminates, there is a short to ground in the circuit.
scientia non olet · About LEMON Manuals