Circuit/System Verification
WARNING: This page is about a different car, the 2015 Chevrolet Trax and 2015 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition OFF, gear shift selector in PARK, ignition ON.
- Verify that S39 Ignition Switch can be rotated to the ON position.
- If the ignition switch cannot be rotated to the ON position and Ignition Key Cannot Be Inserted, Rotated, or Removed from the Ignition Lock Cylinder has NOT been performed
Refer to Ignition Key Cannot Be Inserted, Rotated, or Removed from the Ignition Lock Cylinder .
- If the ignition switch can not be rotated to the ON position and Ignition Key Cannot Be Inserted, Rotated, or Removed from the Ignition Lock Cylinder has been performed
Refer to Circuit/System Testing.
- If the ignition switch can be rotated to the ON position
- If the ignition switch cannot be rotated to the ON position and Ignition Key Cannot Be Inserted, Rotated, or Removed from the Ignition Lock Cylinder has NOT been performed
- Ignition ON, gear shift selector in NEUTRAL, ignition OFF.
- Verify that the S39 Ignition Switch cannot be rotated to the LOCK position.
- If the ignition switch can be rotated to the LOCK position and Ignition Key Cannot Be Inserted, Rotated, or Removed from the Ignition Lock Cylinder has NOT been performed
Refer to Ignition Key Cannot Be Inserted, Rotated, or Removed from the Ignition Lock Cylinder .
- If the ignition switch can be rotated to the LOCK position and Ignition Key Cannot Be Inserted, Rotated, or Removed from the Ignition Lock Cylinder has been performed
Refer to Circuit/System Testing.
- If the ignition switch cannot be rotated to the LOCK position
- If the ignition switch can be rotated to the LOCK position and Ignition Key Cannot Be Inserted, Rotated, or Removed from the Ignition Lock Cylinder has NOT been performed
- All OK.