LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2015 >> Cruze LT, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 18 (Wiring Systems And Power Management - Diagnostic Information And Procedures) >> Diagnostic Information and Procedures >> DTC B147E or B147F: Battery Saver Relay >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2015 Chevrolet Trax and 2015 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.
  1. Enable battery saver mode (transport mode) in the vehicle.
  2. Verify the KR104A Battery Saver Relay 1 clicks open and closed when cycling the ignition between ON and OFF.
    • If the KR104A Battery Saver Relay 1 does not click open and closed 

      Refer to Circuit/System Testing.

    • If the KR104A Battery Saver Relay 1 clicks open and closed 
  3. All OK.