LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2015 >> Cruze LT, Automatic Trans >> Repair and Diagnosis >> Engine Performance >> Tune-Up >> Engine Controls And Fuel - 1.4L (LUJ, LUV) - Repair Instructions >> Repair Instructions >> Ignition Coil Replacement >> Removal Procedure

Removal Procedure

  1. Remove the engine sight shield. Refer to Engine Sight Shield Replacement .
  2. Disconnect the ignition coil wiring harness plug (2) from the ignition coil (1).
    Fig 1: Ignition Coil And Ignition Coil Wiring Harness Plug
    GM2191363Courtesy of GENERAL MOTORS COMPANY
  3. Remove the 2 ignition coil bolts (1).
    Fig 2: Ignition Coil Bolts
    GM2191364Courtesy of GENERAL MOTORS COMPANY
  4. Install EN-6009  remover/installer (1) to the ignition coil (2).
    Fig 3: Ignition Coil And Special Tool
    GM2191365Courtesy of GENERAL MOTORS COMPANY
  5. Remove the ignition coil.
scientia non olet · About LEMON Manuals