Removal Procedure
- Open the hood.
- Disconnect the battery. Refer to Battery Negative Cable Disconnection and Connection
.
- Disconnect the turbocharger pressure sensor wiring harness plug (1).
Courtesy of GENERAL MOTORS COMPANY
- Loosen the charge air cooler outlet air hose clamp (2).
- Remove the charge air cooler outlet air hose (3) from the throttle body.
- Remove the front bumper fascia. Refer to Front Bumper Fascia Replacement
.
- Remove the charger air cooler outlet air hose bolt (3).
Courtesy of GENERAL MOTORS COMPANY
- Loosen the clamp.
- Remove the charger air cooler outlet air hose (1) from the charge air cooler (2).