Removal Procedure
- Open the hood.
- Disconnect the battery. Refer to Battery Negative Cable Disconnection and Connection
.
- Loosen the charge air cooler inlet air hose clamp (1).
Courtesy of GENERAL MOTORS COMPANY
- Remove the charge air cooler inlet air hose (2) from the turbocharger.
- Remove the front bumper fascia. Refer to Front Bumper Fascia Replacement
.
- Unlock the charge air cooler inlet air hose quick connector (1).
Courtesy of GENERAL MOTORS COMPANY
- Remove the charger air cooler inlet air hose (2).