Monitored Emission Control Systems

The OBD II System monitors all emission control systems that are on-board. The OBD II regulations require monitoring of the following:

• The air conditioning system
• The catalyst efficiency
• Comprehensive component monitoring, emission related inputs and outputs
• The evaporative emission (EVAP) system
• The fuel delivery system
• Heated catalyst monitoring
• Misfire monitoring
• The oxygen sensor system (HO2S)
• The oxygen sensor heater system (HO2S heater)

For the specific DTCs required for each system, refer to Inspection/Maintenance (I/M) System DTC Table (LUV) . Systems such as fuel delivery, misfire and comprehensive components may not be listed in a system status list. These tests run continuously and do not require an inspection/maintenance system status indicator.