Circuit/System Verification
- Ignition ON, Verify the parameters listed below do not display Malfunction when commanding the Turbocharger Bypass Solenoid Valve ON and OFF with a scan tool:
- Turbocharger Bypass Solenoid Valve Control Circuit Low Voltage Test Status
- Turbocharger Bypass Solenoid Valve Control Circuit Open Test Status
- Turbocharger Bypass Solenoid Valve Control Circuit High Voltage Test Status
- If Malfunction is displayed
Refer to Circuit/System Testing .
- If Malfunction is not displayed
- Operate the vehicle within the Conditions for Running the DTC. You may also operate the vehicle within the conditions that you observed from the Freeze Frame/Failure Records data.
- Verify a DTC does not set.
- If a DTC sets
Refer to Circuit/System Testing
- If a DTC does not set
- If a DTC sets
- All OK