Repair Verification
- Ignition OFF, all access doors closed, all vehicle systems OFF. It may take up to 2 min for all vehicle systems to power down.
- Ignition ON.
- Command the Reductant System Data Reset On with a scan tool.
- Ignition OFF, all access doors closed, all vehicle systems OFF. It may take up to 2 min for all vehicle systems to power down.
- Ignition ON.
- Verify the reductant lamp turns off, if illuminated.
- If the reductant lamp does not turn Off
A condition with the system still exists
- If the reductant lamp turns Off
- If the reductant lamp does not turn Off
- All OK.