Removal Procedure
- Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
- Remove the right front wheel house liner. Refer to Front Wheelhouse Liner Replacement .
- Lower the vehicle.
- Remove the hydraulic valve lash adjuster arms. Refer to Hydraulic Valve Lash Adjuster Arm Replacement .
- Remove the spark plugs. Refer to Spark Plug Replacement .
- Adjust the engine to TDC of cylinder 1 and fix the crankshaft. Refer to Camshaft Timing Chain Adjustment .
- Shift to 5th gear (MT) or park position (AT) and apply the park brake.NOTE: Wheels must contact the ground.