Installation Procedure
- Remove the tools from the cylinder head.
- Release the air pressure and remove the air pressure adapter form the spark plug hole.
- Shift to neutral gear and release the park brake.
- Install the spark plugs. Refer to Spark Plug Replacement .
- Install the hydraulic valve lash adjuster arms. Refer to Hydraulic Valve Lash Adjuster Arm Replacement .
- Raise the vehicle.
- Remove the EN-952 fixing pin and install the crankshaft bearing cap tie plate hole plug. Refer to Camshaft Timing Chain Adjustment .
- Install the right front wheelhouse liner. Refer to Front Wheelhouse Liner Replacement .
- Lower the vehicle.