LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2015 >> Cruze LT, Automatic Trans >> Repair and Diagnosis >> Engine Mechanical >> Engine Mechanical - 1.4L (LUV) >> Repair Instructions - On Vehicle >> Crankshaft Front Oil Seal Replacement >> Installation Procedure

Installation Procedure

  1. Install NEW crankshaft front oil seal (1) to EN-960  installer (2).
    Fig 1: Crankshaft Front Oil Seal And Installer
    GM2191466Courtesy of GENERAL MOTORS COMPANY
  2. Install crankshaft front oil seal by means of EN-960  installer (1) to engine front cover (2).
    Fig 2: Crankshaft Front Oil Seal Installer And Engine Front Cover
    GM2191465Courtesy of GENERAL MOTORS COMPANY
  3. Ensure that the crankshaft front oil seal (2) is flush with the engine front cover (1).
    Fig 3: Engine Front Cover And Crankshaft Front Oil Seal
    GM2191467Courtesy of GENERAL MOTORS COMPANY
  4. Install the crankshaft balancer. Refer to Crankshaft Balancer Replacement .
  5. Remove the collecting basin.
  6. Check and correct the engine oil level.
scientia non olet · About LEMON Manuals