LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2015 >> Cruze LT, Automatic Trans >> Repair and Diagnosis >> Engine Mechanical >> Engine Mechanical - 1.4L (LUV) >> Repair Instructions - Off Vehicle >> Intake Manifold Assemble

Intake Manifold Assemble

  1. Install the evaporative emission canister purge solenoid valve (3).
    Fig 1: Evaporative Emission Canister Purge Solenoid Valve And Manifold Absolute Pressure Sensors
    GM2191857Courtesy of GENERAL MOTORS COMPANY
  2. Install the 2 manifold absolute pressure sensors (2).
  3. Install the 2 manifold absolute pressure sensor bolts (1) and tighten.
    4. Fig 2: Fuel Injection Fuel Rail Assembly And Intake Manifold Gasket
    GM2191856Courtesy of GENERAL MOTORS COMPANY
  4. Install the fuel injection fuel rail assembly (3).
  5. Install the 2 fuel injection rail bolts (2) and tighten to 8 N.m (71 lb in).
    CAUTION: Refer to Fastener Caution .
  6. Install the fuel injection rail ground cable nut (1) and tighten.
  7. Install a NEW intake manifold gasket (4).
scientia non olet · About LEMON Manuals