LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2015 >> Cruze LT, Automatic Trans >> Repair and Diagnosis >> Engine Mechanical >> Engine Mechanical - 1.4L (LUV) >> Repair Instructions - Off Vehicle >> Intake Camshaft Removal

Intake Camshaft Removal

  1. Remove the camshaft bearing cap bolts in a spiral sequence as shown one turn at a time until there is no spring tension pushing on the camshaft.
    Fig 1: Intake Camshaft Bearing Cap Bolts Removal Sequence
    GM2190728Courtesy of GENERAL MOTORS COMPANY
  2. Remove the 10 camshaft bearing cap bolts (1).
    Fig 2: Intake Camshaft, Camshaft Bearing Caps And Bolts
    GM2190730Courtesy of GENERAL MOTORS COMPANY
    NOTE: Mind the markings on the camshaft bearing caps to ensure they will be installed in the same position.
  3. Remove the 5 camshaft bearing caps (2).
  4. Remove the intake camshaft (3).
scientia non olet · About LEMON Manuals