LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2015 >> Cruze LT, Automatic Trans >> Repair and Diagnosis >> Engine Mechanical >> Engine Mechanical - 1.4L (LUV) >> Repair Instructions - Off Vehicle >> Intake Camshaft Installation

Intake Camshaft Installation

  1. Lubricate camshaft and camshaft bearing caps with engine oil.
    Fig 1: Intake Camshaft, Camshaft Bearing Caps And Bolts
    GM2190730Courtesy of GENERAL MOTORS COMPANY
    NOTE: Mind the markings on the camshaft bearing caps. Camshaft bearing caps should be installed in their original position.
  2. Install the intake camshaft (3).
  3. Install the 5 camshaft bearing caps (2).
  4. Install the 10 camshaft bearing cap bolts (1) and hand tighten.
  5. Tighten the camshaft bearing cap bolts one turn at a time and in a spiral sequence as shown to 8 N.m (71 lb in).
    Fig 2: Intake Camshaft Bearing Cap Bolts Tightening Sequence
    GM2190731Courtesy of GENERAL MOTORS COMPANY
    CAUTION: Refer to Fastener Caution .
    NOTE: Tighten the camshaft bearing cap bolts one turn at a time in order to avoid shape distortion of the camshaft.
scientia non olet · About LEMON Manuals