LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2015 >> Cruze LT, Automatic Trans >> Repair and Diagnosis >> Engine Mechanical >> Engine Mechanical - 1.4L (LUV) >> Repair Instructions - Off Vehicle >> Engine Oil Cooler Assemble

Engine Oil Cooler Assemble

  1. Install the engine oil filter cap (1) along with a NEW seal ring (2) and a NEW oil filter element (3) and tighten to 25 N.m (18 lb ft).
    Fig 1: Engine Oil Pressure Indicator Switch, Oil Filter Cap And Oil Filter Element
    GM2191944Courtesy of GENERAL MOTORS COMPANY
    CAUTION: Refer to Fastener Caution .
  2. Install the engine oil pressure indicator switch (5) and NEW seal ring (4) and tighten to 20 N.m (15 lb ft).
  3. Install the oil cooler coolant outlet hose (5)
    Fig 2: Locating Engine Oil Cooler Components
    GM2191943Courtesy of GENERAL MOTORS COMPANY
  4. Install the oil cooler coolant outlet hose clamp (4).
  5. Install the oil cooler coolant inlet pipe (3) and a NEW seal ring (6).
  6. Install the oil cooler coolant inlet pipe bolt (7) and tighten to 10 N.m (89 lb in).
  7. Install the oil cooler coolant inlet hose (1).
  8. Install oil cooler coolant inlet hose clamp (2).
scientia non olet · About LEMON Manuals