Engine Front Cover Assemble
- Install the crankshaft front oil seal (10).
- Install the oil pressure relief valve (7), (8) and (9) and tighten to 50 N.m (37 lb ft).
- Install the exhaust camshaft position sensor (5) and the seal ring (4).
- Install the exhaust camshaft sensor bolt (6) and tighten to 6 N.m (53 lb in).
- Install the intake camshaft position sensor (2) and the seal ring (3).
- Install the intake camshaft sensor bolt (1) and tighten to 6 N.m (53 lb in).