- Clean the sealing surfaces and remove all remains of old sealing compound material.
- Apply sealing compound to the shown areas (1) and (2). Refer to Adhesives, Fluids, Lubricants and Sealers .
Courtesy of GENERAL MOTORS COMPANY
NOTE:
The thickness of the sealing bead should be 2 mm (0.0787 in).
- Install the NEW engine front cover gasket (1).
Courtesy of GENERAL MOTORS COMPANY
NOTE:
Mind the guide sleeves.
- Install the timing chain. Refer to Camshaft Timing Chain Installation .
- Install the engine front cover. Refer to Engine Front Cover and Oil Pump Installation .
NOTE:
The complete installation procedure should not take longer than 10 minutes.