LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2015 >> Cruze LT, Automatic Trans >> Repair and Diagnosis >> Engine Mechanical >> Engine Mechanical - 1.4L (LUV) >> Repair Instructions - Off Vehicle >> Drive Belt Tensioner Installation

Drive Belt Tensioner Installation

  1. Install the drive belt tensioner (1).
    Fig 1: Drive Belt Tensioner And Bolts
    GM2190385Courtesy of GENERAL MOTORS COMPANY
  2. Install the upper drive belt tensioner bolt (2).
  3. Install the lower drive belt tensioner bolt (3).
  4. Tighten the lower drive belt tensioner bolt (M8) to 22 N.m (16 lb ft).
    CAUTION: Refer to Fastener Caution .
  5. Tighten the upper drive belt tensioner bolt to 55 N.m (41 lb ft).
scientia non olet · About LEMON Manuals