LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2015 >> Cruze LT, Automatic Trans >> Repair and Diagnosis >> Engine Mechanical >> Engine Mechanical - 1.4L (LUV) >> Repair Instructions - Off Vehicle >> Cylinder Head Removal

Cylinder Head Removal

  1. Loosen the 12 cylinder head bolts in the sequence as shown. Use the following procedure:
    Fig 1: Cylinder Head Bolts Loosening Sequence
    GM2190736Courtesy of GENERAL MOTORS COMPANY
    1. Loosen the cylinder head bolts 90 degrees.
    2. Loosen the cylinder head bolts 180 degrees.
  2. Remove and DISCARD the 12 cylinder head bolts (1).
    Fig 2: Cylinder Head, Gasket, Bolts And Guide Sleeves
    GM2190737Courtesy of GENERAL MOTORS COMPANY
    NOTE: Do not damage the guide sleeves (4) and (5).
  3. Remove the cylinder head (2).
  4. Remove the cylinder head gasket (3).
scientia non olet · About LEMON Manuals