LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2015 >> Cruze LT, Automatic Trans >> Repair and Diagnosis >> Engine Mechanical >> Engine Mechanical - 1.4L (LUV) >> Repair Instructions - Off Vehicle >> Camshaft Sprocket Installation

Camshaft Sprocket Installation

  1. Install the intake camshaft sprocket (3).
    Fig 1: Intake Camshaft Sprocket, Bolt And Intake Camshaft Position Exciter Wheel
    GM2190718Courtesy of GENERAL MOTORS COMPANY
  2. Install the intake camshaft position sensor exciter wheel (2) and the intake camshaft sprocket bolt (1), but do not tighten yet.
  3. Install the exhaust camshaft sprocket.
  4. Install the exhaust camshaft position sensor exciter wheel and the exhaust camshaft sprocket bolt, but do not tighten yet.
    NOTE: Tightening of camshaft sprocket bolts will be done after the engine front cover installation.
scientia non olet · About LEMON Manuals