LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2015 >> Cruze LT, Automatic Trans >> Repair and Diagnosis >> Engine Mechanical >> Engine Mechanical - 1.4L (LUV) >> Repair Instructions - Off Vehicle >> Camshaft Position Actuator Solenoid Valve Removal

Camshaft Position Actuator Solenoid Valve Removal

  1. Remove the 4 camshaft position actuator solenoid valve bolts (1).
    Fig 1: Camshaft Position Actuator Solenoid Valve Bolts
    GM2191735Courtesy of GENERAL MOTORS COMPANY
  2. Move the intake camshaft position actuator solenoid valve (1) carefully counter clockwise in the position shown.
    Fig 2: Intake Camshaft Position Actuator Solenoid Valve And Exhaust Camshaft Position Actuator Solenoid Valve
    GM2191733Courtesy of GENERAL MOTORS COMPANY
  3. Move the exhaust camshaft position actuator solenoid valve (2) carefully clockwise in the position shown.
  4. Carefully remove the 2 camshaft position actuator solenoid valves (2) and the seal rings (1).
    Fig 3: Camshaft Position Actuator Solenoid Valves And Seal Rings
    GM2190650Courtesy of GENERAL MOTORS COMPANY
    CAUTION: The camshaft position actuator solenoid valves must be kept parallel to the engine front cover during removal and installation. The camshaft position actuator solenoid valves can be damaged if they become wedged or stuck during this process.
scientia non olet · About LEMON Manuals