LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2015 >> Cruze LT, Automatic Trans >> Repair and Diagnosis >> Engine Mechanical >> Engine Mechanical - 1.4L (LUV) >> Repair Instructions - Off Vehicle >> Camshaft Cover Installation

Camshaft Cover Installation

  1. Clean the sealing surfaces.
  2. Apply sealing compound to areas (1) and (2). Refer to Adhesives, Fluids, Lubricants and Sealers .
    Fig 1: Sealing Compound Application Areas
    GM2190649Courtesy of GENERAL MOTORS COMPANY
    NOTE: The thickness of the sealing bead should be 2 mm (0.0787 in).
  3. Install the camshaft cover (2) and a NEW gasket (3).
    Fig 2: Camshaft Cover And Gasket
    GM2190620Courtesy of GENERAL MOTORS COMPANY
    NOTE: The installation procedure should not take longer than 10 minutes.
  4. Install the 15 camshaft cover bolts (1).
  5. Tighten the 15 camshaft cover bolts in a sequence as shown to 8 N.m (71 lb in).
    Fig 3: Camshaft Cover Bolts Tightening Sequence
    GM2190648Courtesy of GENERAL MOTORS COMPANY
  6. Install the oil level indicator (1).
    Fig 4: Engine Oil Level Indicator
    GM2190647Courtesy of GENERAL MOTORS COMPANY
scientia non olet · About LEMON Manuals