Automatic Transmission Flex Plate Removal

Special Tools 

EN-652  Flywheel Holder

For equivalent regional tools, refer to Special Tools .

1. Install the EN-652  flywheel holder (1) in order to fix the automatic transmission flex plate (2).
   Fig 1: Automatic Transmission Flex Plate

   Courtesy of GENERAL MOTORS COMPANY
2. Remove and DISCARD the 6 automatic transmission flex plate bolts (2).
   Fig 2: Automatic Transmission Flex Plate And Bolts

   Courtesy of GENERAL MOTORS COMPANY
3. Remove the automatic transmission flex plate (1).