LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2015 >> Cruze LT, Automatic Trans >> Repair and Diagnosis >> Engine Mechanical >> Engine Mechanical - 1.4L (LUV) >> Diagnostic Information and Procedures >> Oil Pressure Diagnosis and Testing >> Installation Procedure

Installation Procedure

  1. Install the oil pressure indicator switch (1) and a NEW oil pressure indicator switch seal ring (2).
    Fig 1: Engine Oil Pressure Indicator Switch
    GM2191866Courtesy of GENERAL MOTORS COMPANY
  2. Tighten the oil pressure indicator switch to 20 N.m (15 lb ft).
    CAUTION: Refer to Fastener Caution .
scientia non olet · About LEMON Manuals