| Low oil pressure |
Insufficient or poor oil supply to components.
- Perform oil pressure test.
- Repair or replace all damaged components.
|
| Loose torque converter bolts |
- Inspect the torque converter bolts and flywheel.
- Repair or replace all damaged components.
|
| Loose and/or damaged flywheel |
- Inspect the flywheel and flywheel attaching bolts.
- Repair or replace all damaged components.
|
| Excessive piston-to-cylinder bore clearance |
- Inspect the piston rings for low ring tension, broken or worn rings, inspect cylinder bore.
- Repair or replace all damaged components.
|
| Excessive crankshaft thrust bearing clearance |
- Inspect the crankshaft end play and crankshaft thrust bearings.
- Repair or replace all damaged components.
|
| Excessive crankshaft bearing clearance |
- Inspect the crankshaft bearings and crankshaft journals.
- Repair or replace all damaged components.
|