| Engine Coolant Fan Motor Bolt |
4 N.m |
36 lb in |
| Engine Coolant Fan Resistor Bolt |
4 N.m |
36 lb in |
| Engine Coolant Thermostat Bolt |
8 N.m |
71 lb in |
| Engine Coolant Thermostat Bypass Pipe Bolt |
8 N.m |
71 lb in |
| Engine Coolant Thermostat Housing Bolt |
8 N.m |
71 lb in |
| Engine Coolant Thermostat Housing Retainer Nut |
9 N.m |
80 lb in |
| Engine Oil Cooler Bolt |
8 N.m |
71 lb in |
| Engine Oil Cooler Housing Bolt |
25 N.m |
19 lb ft |
| Engine Oil Cooler Pipe Bolt |
8 N.m |
71 lb in |
| Hood Hold Open Rod Retainer Bracket Bolt |
22 N.m |
17 lb ft |
| Radiator Bracket Bolt |
25 N.m |
18 lb ft |
| Radiator Support Bracket Bolt |
22 N.m |
17 lb ft |
| Water Pump Housing Bolt |
8 N.m |
71 lb in |
| Water Pump Pulley Bolt |
20 N.m (1) |
15 lb ft (1) |
| (1) Recut threads before re-use and insert bolts with screw locking compound. The installation time, including torque inspection, is a maximum of 10 minutes. |