LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2015 >> Cruze LT, Automatic Trans >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> Engine Cooling System >> Repair Instructions >> Water Pump Pulley Replacement (1.4L LUV) >> Removal Procedure

Removal Procedure

  1. Remove the air cleaner assembly. Refer to Air Cleaner Assembly Replacement .
  2. Remove the engine mount bracket. Refer to Engine Mount Bracket Replacement - Right Side .
  3. Remove the drive belt. Refer to Drive Belt Replacement .
  4. Loosen the 3 water pump pulley bolts (2) while holding the water pump pulley hub with a wrench.
    Fig 1: Water Pump Pulley
    GM2190373Courtesy of GENERAL MOTORS COMPANY
  5. Remove the 3 water pump pulley bolts (2).
  6. Remove the water pump pulley (1).
scientia non olet · About LEMON Manuals