LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2015 >> Cruze LT, Automatic Trans >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> Engine Cooling System >> Repair Instructions >> Throttle Body Heater Inlet Hose Replacement >> Removal Procedure

Removal Procedure

  1. Open the hood.
  2. Place a collection basin under the vehicle.
  3. Disconnect the throttle body heater inlet hose connector from the engine coolant thermostat housing (1).
    Fig 1: Engine Coolant Thermostat Housing, Throttle Body & Heater Inlet Hose
    GM2027531Courtesy of GENERAL MOTORS COMPANY
  4. Loosen the clamp and disconnect the throttle body heater inlet hose connector from the throttle body (3).
  5. Remove the throttle body heater inlet hose (2).
scientia non olet · About LEMON Manuals