LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2015 >> Cruze LT, Automatic Trans >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> Engine Cooling System >> Repair Instructions >> Radiator Surge Tank Replacement >> Installation Procedure

Installation Procedure

  1. Install the radiator surge tank (1) and clip into the bracket (3).
    Fig 1: Surge Tank And Components
    GM2189555Courtesy of GENERAL MOTORS COMPANY
  2. Connect coolant level sensor wiring harness plug (4).
  3. Install radiator surge tank clip (2).
  4. Install the radiator surge tank engine hose (5), install the clamp.
  5. Install the engine coolant air bleed hose (6), install the clamp.
  6. Refill the radiator surge tank with the coolant fluid, which has been drained out before.
scientia non olet · About LEMON Manuals