LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2015 >> Cruze LT, Automatic Trans >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> Engine Cooling System >> Repair Instructions >> Radiator Inlet Hose Replacement (1.8L LUW and LWE) >> Installation Procedure

Installation Procedure

  1. Install the radiator inlet hose (3) to the thermostat housing (5).
    Fig 1: Identifying Radiator, Thermostat Housing, Clamps And Hoses
    GM2027554Courtesy of GENERAL MOTORS COMPANY
  2. Install the radiator inlet hose clamp (4).
  3. Install the radiator inlet hose (3) to the radiator (1).
  4. Install the radiator inlet hose clamp (2).
  5. Lower the vehicle.
  6. Fill the cooling system. Refer to Cooling System Draining and Filling (GE-47716 Fill)  and Cooling System Draining and Filling (Static Fill) .
  7. Clip in the engine control module, if necessary.
  8. Connect the battery. Refer to Battery Negative Cable Disconnection and Connection .
scientia non olet · About LEMON Manuals