LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2015 >> Cruze LT, Automatic Trans >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> Engine Cooling System >> Repair Instructions >> Engine Oil Cooler Replacement (1.8L LUW and LWE) >> Removal Procedure

Removal Procedure

  1. Remove the exhaust manifold. Refer to Exhaust Manifold Replacement (1.8L LUW and LWE) .
  2. Drain the cooling system. Refer to Cooling System Draining and Filling (GE-47716 Fill)  and Cooling System Draining and Filling (Static Fill) .
  3. Remove the 2 engine oil cooler outlet pipe bolts (1).
    Fig 1: Identifying Engine Oil Cooler Outlet Pipe And Bolts
    GM2026830Courtesy of GENERAL MOTORS COMPANY
  4. Remove the engine oil cooler outlet pipe (2) from the engine oil cooler housing and the engine coolant thermostat housing.
  5. Remove the 2 engine oil cooler outlet pipe gaskets.
  6. Remove the 5 engine oil cooler housing bolts (2).
    Fig 2: Identifying Engine Oil Cooler Housing, Bolts And Engine Oil Cooler Inlet Pipe
    GM2026867Courtesy of GENERAL MOTORS COMPANY
  7. Remove the engine oil cooler housing (1).
  8. Remove the 2 engine oil cooler housing gaskets.
  9. Remove the engine oil cooler inlet pipe (3).
  10. Remove the 2 engine oil cooler inlet pipe gaskets.
  11. Remove the 6 engine oil cooler bolts (2) and the engine oil cooler (1) from the engine oil cooler housing.
    Fig 3: Identifying Engine Oil Cooler And Bolts
    GM2026831Courtesy of GENERAL MOTORS COMPANY
  12. Remove the engine oil cooler gasket.
scientia non olet · About LEMON Manuals