LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2015 >> Cruze LT, Automatic Trans >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> Engine Cooling System >> Repair Instructions >> Engine Oil Cooler Outlet Pipe Replacement >> Installation Procedure

Installation Procedure

  1. Clean the engine oil cooler outlet pipe sealing surfaces.
  2. Install the 2 NEW engine oil cooler outlet pipe gaskets.
  3. Install the engine oil cooler outlet pipe (2) to the engine oil cooler housing and the engine coolant thermostat housing.
    Fig 1: Identifying Engine Oil Cooler Outlet Pipe And Bolts
    GM2026830Courtesy of GENERAL MOTORS COMPANY
  4. Install the 2 engine oil cooler outlet pipe bolts (1) and tighten to 8 N.m (71 lb in).
    CAUTION: Refer to Fastener Caution .
  5. Fill the cooling system. Refer to Cooling System Draining and Filling (GE-47716 Fill)  and Cooling System Draining and Filling (Static Fill) .
  6. Install the exhaust manifold. Refer to Exhaust Manifold Replacement (1.8L LUW and LWE) and Exhaust Manifold Replacement (2.0L Diesel LUZ) .
scientia non olet · About LEMON Manuals