LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2015 >> Cruze LT, Automatic Trans >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> Engine Cooling System >> Repair Instructions >> Engine Coolant Fan Shroud Replacement (2.0L Diesel LUZ) >> Assemble Procedure

Assemble Procedure

  1. Install the engine coolant fan motor (2).
    Fig 1: Engine Coolant Fan Control Module, Fan Motor & Bolts
    GM2887230Courtesy of GENERAL MOTORS COMPANY
  2. Install the 3 engine coolant fan motor bolts (3) and tighten to 4 N.m (35 lb in).
    CAUTION: Refer to Fastener Caution
  3. Clip in the engine coolant fan control module wiring harness.
  4. Install the engine coolant fan control module (1) by clipping the retainer clip (arrows).
scientia non olet · About LEMON Manuals