LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2015 >> Cruze LT, Automatic Trans >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> Engine Cooling System >> Repair Instructions >> Engine Coolant Fan Resistor Replacement >> Removal Procedure

Removal Procedure

  1. Disconnect the negative cable from the battery. Refer to Battery Negative Cable Disconnection and Connection .
  2. Disconnect the engine coolant fan resistor wiring harness plug.
    Fig 1: Identifying Engine Coolant Fan Resistor Wiring Harness Connector
    GM2028322Courtesy of GENERAL MOTORS COMPANY
  3. Remove the engine coolant fan resistor bolt (2).
  4. Remove the engine coolant fan resistor (1).
scientia non olet · About LEMON Manuals